Fire inspections in 3 simple steps
A fire inspection requires attention and requires expertise. Fire safety experts are scarce. At tjecco, we believe that the experts with their knowledge should be used to their best advantage. That’s why our inspection process is slightly different. The basic principle is that the inspector inspects on site whenever possible. The entire inspection process from preparation to reporting and delivery to the client is described in 3 simple steps. Which ones are they? You can read about that in this article!
Want to know immediately what inspecting with tjecco inspect will do for you?
Step 1: Preparing for the inspection
In the office by the back office
You have been instructed by your client to go do an inspection for fire penetrations, BMI, sprinkler, emergency lighting, etc. After you receive important data from the client, you can get started. You don’t have to do this yourself; a colleague in the back office can do it for you. All that person needs? A digital building floor plan, the rooms and tjecco inspect. You save time on site during fire inspection. Work is transferable and as an inspector you do what you do best, which is to record findings and risks. How much time can you save on location? Calculate your benefit using the ROI calculator!
Step 2: Graphical inspection
Quick, simple and clear
The fire inspection is ready for you on your tablet. You walk into the building and you can start right away. You select the inspection point you need to assess and put it on the map. This way it is always clear where an inspection point is located in the building, for everyone. You assess the asset and move on to the next one. Until you have had every room and inspected all points. Colleagues can see what you have seen and can answer customer questions directly. Want to know what else tjecco inspect offers?
Step 3: Reporting in your own corporate identity
At the touch of a button
All risks identified and defects reported? You have finished your fire inspection. Where you normally went about putting the report together, in inspect you answer a few questions and generate the report with the click of a button. In your own corporate identity, too. All photos, findings, risks, etc. will be in the right place in the report. This is how you deliver to your customer in no time.
Check out what it brings!
A streamlined fire inspection process provides a clear workflow for everyone in the organization. The back office can prepare the inspection in the office. Then the inspector does his on-site inspection. Is the inspector ready? All findings as well as any defects are automatically put in the report in the right place. Then, with the click of a button, the report is ready in your own house style! That is professional!
Did you do the calculation and want to know how it works? Request a free demo!
Digital management
In one integrated platform
You delivered report to client. How to move forward? Eventually, you want to do management and maintenance of various fire safety aspects at the client’s premises. You have already collected the data during the inspection. Why not use all this data to do management and maintenance at the customer’s site. The findings during the periodic inspections and the necessary certificates and documents are entered into the digital logbook. With this, you will have customers for life and be able to generate more repeat business. Want to know about the economies of scale working with tjecco?
Some partners of tjecco
Geschreven door: Kaj
op 30 augustus 2023